Leaked: OS 10.1.0.4687 for the BlackBerry Z10 and Q10

OS 10.1.0.4687 has leaked for the BlackBerry Z10 models STL-100 2-3-4 and BlackBerry Q10 models SQN100-1-2-3-4-5! This is huge news for all of you OS leak lovers out there. At this time there is no word on what has changed in this leak so if you see anything different feel free to let us know in the comments!

It’s my pleasure to present to you 10.1.0.4687 for STL-100 2/3/4 AND SQN100-1/2/3/4/5!

The procedure is the same for each device, inside each file is an autoloader for the STL devices, and all SQN devices. SQR USERS: You can atempted to load this and flash a different Radio to get it working for you. Remember you do so at your own risk. STL100-1: I’m sorry, I don’t have anything for you at this time.

Please select the correct OS for your model device. If you don’t know which model you have, in any text or BBM field type “myver” – without the quotation marks – and tap the space bar, and the info you need will appear.
These are 7z files. Download 7zip to extract (for those who don’t know, it’s free!).

Back up all device info, to your selected locations, SHUT DOWN LINK (if you used it for your back up), set your device to airplane mode, connect to USB. Unzip the downloaded zip file to your desktop, and start the .exe. Enter any password info, hit enter, and go make a sandwich, take a shower, whatever…. Once you see the Welcome Screen on your device, detach from USB, and perform setup. Follow ALL setup prompts.

STANDARD DISCLAIMER: As per usual, I, nor Crackberry are responsible for any damage done to your device.

ENJOY!!!!

#SQN – ALL MODEL Q10 MEGA LINK:

https://mega.co.nz/#!rF120LwC!LSY-MA…lInCQqTKi2eELg

#SQN – ALL MODEL Q10 GOOGLE DOCS LINK:

https://docs.google.com/file/d/0Bz0i…it?usp=sharing

#STL100-2, STL100-3, STL100-4 MEGA LINK.:

https://mega.co.nz/

#!LI8wRIAZ!ayt5sH…e42xPJzpst4Nqc
STL100-2, STL100-3, STL100-4

GOOGLE DOCS LINK:

https://docs.google.com/file/d/0Bz0i…it?usp=sharing

    Installation Instructions if needed:

~Turn off your BlackBerry Z10/Q10.

~Run the file that you just extracted.

~Connect your Z10/Q10 to your usb cable and quickly turn it on.

~The autloader should connect to your Z10/Q10 and start the process.

~Sit back, have a coffee or a tea and wait until the process is finished.

~When the autoloader has written 100%, the program will terminate and the window will close.

~Disconnect your BlackBerry Z10/Q10 and wait for it to reboot.

#Please note that we do not accept any responsibility for anything this does to your device.  Please do not attempt to load this unless you are comfortable with what you are doing.  You will need a Windows machine to use the loader, but if you do load it drop us a comment letting us know how it runs

Via : CB